- Live proof before you pay
- Exact pieces listed
- Ships across Canada
- Order online, no account needed
How to install your truck lettering
How do I put truck lettering on myself?
To install truck lettering, clean the panel, hinge the graphic in place with masking tape and check it is level, peel the backing and squeegee from the centre out, then peel off the transfer tape slowly. Each graphic arrives pre-spaced on application tape with a printed guide. Install steps
The install, step by step

- Clean the surface. Wipe the panel with isopropyl alcohol or an ammonia-free glass cleaner. It must be free of wax, grease and dust.
- Position the graphic. Hold it in place and hinge the top edge with masking tape. Step back and check it is level against the handle line or window edge.
- Peel and squeegee. Lift the graphic on its hinge, peel the backing away, then press it on from the centre outward with firm, overlapping strokes.
- Remove the transfer tape. Peel the clear transfer tape back slowly, folded flat against itself. If a letter lifts, press it back down and squeegee again before you go on.
Kits that come pre-spaced and ready to apply

Custom Door Lettering Pair
Your business name and details on both front doors, cut from solid vinyl.
1 vehicle · 2 front doors · 2 graphics
Pickup Tailgate Lettering
One graphic across the tailgate: your name, number and website for the driver behind you.
1 vehicle · 1 tailgate · 1 graphic
Rear-Window Lettering
One line or two of cut lettering across the rear glass.
1 vehicle · 1 rear window · 1 graphicIn the box
- Your graphics, pre-spaced on application tape
- A printed install guide
- Squeegee
You need
- Isopropyl alcohol or ammonia-free cleaner, and a clean cloth
- Masking tape and a tape measure
| What | Detail | Source |
|---|---|---|
| Included | Graphics pre-spaced on application tape, printed install guide, squeegee | Kit pages |
| Install damage | Not covered; reorder the piece | Remake policy |
Questions
What comes in the box?
Each graphic comes pre-spaced on application tape, with a printed install guide and a squeegee.
What tools do I need?
Isopropyl alcohol or an ammonia-free cleaner, a clean cloth, masking tape and a tape measure. The squeegee is in the box.
Can I reposition it?
Check the position with the tape hinge before you peel the backing. Once the vinyl is pressed down, it is meant to stay.
A piece got damaged while I put it on. Is that covered?
Damage during installation is not covered. Use the reorder page and we make a new piece in the same design.
Last checked against the store's own shipping and returns policy and the live store catalogue. Prices on this page are read live from our store each time it is refreshed.
