What is Retro Tri-Colour Truck Side Stripes | Pair?
Retro Tri-Colour Truck Side Stripes | Pair is available in the configurations shown above. This design ships as pictured in the selected configuration.
Source: Retro Tri-Colour Truck Side Stripes | Pair listing and optionsRetro truck side stripes in three bands that run along the bed and kick up at the rear. In cut vinyl each band is its own colour of vinyl, so the colours stay solid with even gaps between them. You get a pair: one stripe for each side of the truck. Made to order in Ontario for pickups and work trucks.ColourwaysRed, orange and yellow for the classic 80s look, or red, white and red for a maple look.SizesThree bed lengths. Each stripe is 9.8" tall at the rear kick and the bands are 1.1" each with a 0.25" gap between them. Short bed: 60" long. Standard bed: 72" long. Long bed: 90" long. Measure your bed side from the cab gap to the tail light and pick the length that fits.MaterialsFour choices. outdoor-rated Cut Vinyl: each colour is cut from its own solid vinyl, then weeded and laid on application tape. Reflective Cut Vinyl: the same cut design in reflective vinyl. Full-Colour Printed: every colour is printed on white vinyl, then each shape is cut out on its own edge, so the spaces between the shapes show your paint just like the cut version. Printed Reflective: the same printed design on reflective vinyl. Reflective vinyl returns light towards headlights; it does not glow by itself.How to apply Wash the panel with soap and water and let it dry fully. Wipe the spot with rubbing alcohol on a lint-free cloth to lift wax and fingerprints, then let it dry. Set the decal in place with its backing still on and run a strip of masking tape along the top edge as a hinge. Lift the decal on the hinge, peel the backing off the application tape and lower it back onto the panel. Press it down firmly with the edge of a plastic card, working from the centre out to push the air out. Peel the application tape back slowly, folded flat against itself. If a piece lifts with the tape, lay the tape back down, press again and peel more slowly. How to orderPick the bed length, colourway and material, then pay online. We cut your stripes from the order as placed. There is nothing to upload or approve.TurnaroundMade to order in Ontario. Production starts when your order is placed. This page does not promise a fixed production time.Questions buyers askDo I get both sides? Yes. The pair is one stripe for the driver side and a mirrored one for the passenger side.Which length do I need? Measure the flat bed side panel. Pick the length closest to it without running past the tail light.Is this the same as the single-colour retro kit? No. This one is three layered colours; the retro stripe kit is one colour.Where does it go? On a clean, dry, smooth painted bed side panel.

